ColdLogik Rear Door Coolers
CL21 Passive Rear Door Heat Exchanger
Product Description
The ColdLogik CL21 Smart Passive is designed to provide high performance cooling with Zero operational costs. The performance is entirely dependent on the active equipment inside the cabinet, and the available static pressure. At 14° C / 57.2°F Water inlet, the CL21 Smart Passive is able to supply up to 29kW of cooling. Ideal for a bdata centre targeting a highly sustainable operating structure.
If you are content with your selection, please click here
CL20 ProActive Rear Door Heat Exchanger
Product Description
This single source solution replaces the traditional approach to data center cooling and permits load removal of over 90kW per cabinet, therefore has the capability to withstand low medium and the higher density demands experienced today.
The ColdLogik solution means that hot/cold aisles are no longer necessary therefore allowing customers to capitalise on the use of actual real estate within the data hall, permitting alternate room layout and enhanced scalability possibilities.
If you are content with your selection, please click here
CL23 ProActive Rear Door Heat Exchanger
Product Description
Designed to meet the challenging demands of High Performance Compute (HPC) cooling, USystems with its unique RDC has positioned itself alongside water to the chip and immersion cooling technologies, the CL23 HPC which is capable of an unrivalled 200kW of sensible cooling per industry standard rack.
If you are content with your selection, please click here
CL80 300w
Product Description
InRow Coolers ensure efficient thermal and energy performance by removing the heat generated by active equipment, preventing hot exhaust air entering space where it is not permitted.
If you are content with your selection, please click here
CL80 600w
Product Description
The ColdLogik CL80 InRow Cooler provides precision cooling for new or retrofit environments where aisle containment is utilised.
The CL80 also incorporates the award winning ColdLogik Management System to ensure maximum capacity, efficiency and control.
If you are content with your selection, please click here
CDU
Product Description
CDU provides efficient separation of the primary and secondary fluid circuits through a plate heat exchanger. The CDU is designed to operate mainly on RDC/IRC deployments while occupying the space of a standard 42U, 800w, 1200d rack.
Soundproof Rack
Product Description
Designed to deliver the ultimate combination of noise reduction and air-cooled thermal performance. The UCoustic Rack acts as a 1m² server room and allows for a safe and secure deployment of IT equipment whenever and wherever it is needed, saving space, cost, and deployment time.
If you are content with your selection, please click here
Uspace 4210
Product Description
The USpace 42U 600mm x 1000mm 4210 Server Cabinet is the latest premium cabinet range offering from USystems. Smart design and state of the art manufacturing facilities guarantees unbeatable quality, style and innovation associated with USystems.
If you are content with your selection, please click here
Uspace 5210
Product Description
The USpace 5210 Data Rack Solution is a premium comms cabinet range from USystems. Smart design and state of the art manufacturing facilities guarantees the unbeatable quality, style and innovation associated with USystems.
If you are content with your selection, please click here
Uspace 5210 (ODF)
Product Description
The USpace 5210 ODF racks are designed to offer a solution to the challenges of high-density cabling by providing a unique working and access environment within a small footprint that enables you to better manage your high density fibre network, and future-proof it as it evolves.
If you are content with your selection, please click here
Horizontal Aisle Containment
Product Description
Horizontal Aisle Air Containment fully encases the corridor with a rigid enclosure which maximises the efficient use of cold air being fed in through the raised floor. Providing optimum data center cooling without compromising data center design
If you are content with your selection, please click here
Vertical Aisle Containment
Product Description
Vertical containment allows for the integration of raised floor air-conditioning into the standalone warm aisle containment – this way both rows are climatically neutral against the rest of the data center. Here at USystems we provide the very best data center air and water cooling, ensuring your data center is working at its optimum.
If you are content with your selection, please click here
EDGE-3 Soundproof MDC
Product Description
Arguably the best all round performing air-cooled soundproof MDC in the world – the EDGE-3 replaces the need for a dedicated server room and only takes up less than 1m² of valuable office/floor space, allowing localised (Edge) computing in populated or more sensitive locations – especially where there might be a concern of server noise being a distraction or breaching noise at work regulations..
If you are content with your selection, please click here
EDGE-5 Air Conditioned MDC
Product Description
Designed specifically to cater for localised Edge computing demands and associated peripherals as a standalone solution, ideally located in a well ventilated room.
The EDGE -5 is a self-contained air-conditioned MDC and is an ideal solution for projects requiring active cooling without the use of an external condenser.
The cooling is provided by an inverter driven direct expansion system, which under the right conditions is 80% more energy efficient than an non-inverter driven AC unit.
If you are content with your selection, please click here
We engineer for a sustainable tomorrow. View our Coporate Video to find out more 
ColdLogik InRow Cooler
The ColdLogik CL80 InRow Cooler provides precision cooling for new or retrofit environments where aisle containment is utilised. The CL80 also incorporates the award winning ColdLogik Management System to ensure maximum capacity, efficiency and control.
InRow Coolers ensure efficient thermal and energy performance by removing the heat generated by active equipment, preventing hot exhaust air entering space where it is not permitted.
InRow Cooling
The coupling of InRow coolers and aisle containment provide greater precision cooling over old fashioned data centers set-ups such as CRAC based designs.
Aside from taking up less real estate, adding flexibility by creating POD based systems (CAC or HAC), and where required, removing the need for raised flooring, the overall design allows for higher cabinet heat loads. In fact the CL80 InRow is capable of handling up to 80kW total, 67kW sensible cooling per system.
The combination of EC fan technology, managed air flow, water volume control and the incorporation of the ColdLogik Management System culminate in a cooling system that can grow with your heat loads.
Crucially the CL80 InRow can give a 60% energy saving over traditional data center designs.
CL80 InRow Coolers
CL80 InRow cooler
In-row cooling technology is a type of air conditioning system commonly used for data center cooling which the cooling unit is placed between the server cabinets in a row to air to the server equipment’s more effectively. InRow cooling systems use a horizontal airflow pattern utilising hot aisle/cold aisle configurations and they potentially only need occupy one-half rack of row space without any additional side clearance space.
The InRow cooling unit draws warm exhaust air directly from the hot aisle, cools it and distributes it to the cold aisle. This ensures that inlet temperatures are steady for precise operation. Coupling the air conditioning with the heat source produces an efficient direct return air path; this is called “close coupled cooling,” which also lowers the fan energy required. InRow cooling also prevents the mixing of hot and cold air, thus increasing efficiency.
How the Solution Works:
InRow cooling and containment
InRow Cooling for Efficiency
Conventional data center cooling relies on the room being flooded with cold air which works well at minimal power densities. InRow cooling offers increased capacity and power efficiencies by focusing cooling at the actual load perimeter of the aisle containment rather than relying on the air conditioner from the room itself.
InRow units comprise a heat exchange coil which utilises chilled water as the cooling medium which is supplied by the external chiller system.
InRow cooling is an efficient and ideal solution for high density data centers without affecting the baseline cooling and humidity control of room based CRAC units.
CL80 InRow Overview
ColdLogik RMS monitor can monitor up to either 100 devices or 300 devices
Controlled aisle environment
The ColdLogik Management System ‘CMS’ lies at the heart of the InRow solution.
The cold aisle temperature is controlled at the return air from the InRow by the ‘CMS’. Automatically adjusting fan speeds, water flow rate and, if necessary, the output water temperature from the chiller with no operator intervention.
The whole process can also be overseen and controlled at individual cabinet level, room level and remotely via many of the industry standard communication protocols.
The ColdLogik system operates on a ‘sensible cooling’ principle – ‘water above dew point’ with the system remaining free of condensation.
ColdLogik RMS monitor can monitor up to either 100 devices or 300 devices
Data Center Monitoring
ColdLogik RMS monitor can monitor up to either 100 devices or 300 devices
ColdLogik RMS: Complete Control
The ColdLogik solution may be supplied with an optional Room Management System ‘RMS’. The Unit can be fitted inside or outside the DC at the entrance to the data hall, for instance, monitoring the operational condition of the DC or any individual connected item.
It is designed to provide ‘all’ details of the ColdLogik Data Center cooling, interfacing before the Building Management System, but working with any BMS installed.
The ‘RMS’ uses Modbus over TCP/IP communication to access information from each ColdLogik unit (CMS – ColdLogik Management System – built into each cooler).
The ‘RMS’ has an IP address (Network port), six USB ports, and options to upgrade the built-in software with various ‘control or logic’ options. The unit is “bare” until the ColdLogik installation data is programmed in.
ColdLogik RMS monitor can monitor up to either 100 devices or 300 devices
Pre-Installation Services
The ColdLogik commitment in offering you get a full Data Center Health Check for optimization of efficiency and sustainability. Our Data Center experts can deliver a program that will help you improve the overall efficiency and performance of your data center. By simply allowing our technical experts to evaluate your entire data centre’s infrastructure, we can recommend the latest best practices and technologies.
As Carbon reduction is high on everyone’s agenda, one of the quickest ways to achieve targets is to ensure you are deploying the latest efficient technologies and design. This is not just relevant for new build but also retrofitting your aging data center facility.
As part of The ColdLogik Services Optimization program, the Data Center Health Check looks at a data centre’s environment and determines if it is meeting the performance and efficiency goals of its operator.
For data center operators that are considering futureproofing their facility while potentially, introducing higher density practices to meet the demands of AI for instance, our Health Check program can recommend power and cooling modifications to improve efficiency and save tens of thousands of dollars per year.
Addressing Business Challenges the Health Check is designed to address common design flaws and misconceptions, delivering data and analytic reporting to overcome obstacles and challenges that can hinder performance, such as Increased energy consumption in legacy cooling architecture that can be rectified to assist in the reduction in power and water usage as well as a more efficient and intelligent Integrated building system.
As most businesses are committed to reduce Carbon emissions by 2030 or 2050, existing IT related facilities, familiarly known as Data Centers are a key starting point as significant savings can be made here.
On the surface, a data center might not be as healthy as it looks. To assess the health of a data center, our technical engineers conduct an on-site visit to determine if there are specific areas where power and cooling can be improved. We then make recommendations from this data creating a migration path to ensure best practice and improve performance.
Our Data Center specialists, with many years of combined industry knowledge, will not only provide a detailed report covering existing issues, but we will also deliver quick wins through to extensive redesign and deployment, including design, manufacture, installation, and even providing the overall project management of the fit out, as a principal contractor.
We are here to help you make informed decisions about your data center, its transition to a more efficient and sustainable facility to achieve the desired outcome while still ensuring outstanding Carbon reduction.
Smart design and state of the art manufacturing facilities guarantees the unbeatable quality, style and innovation associated with USystems.
Thermodynamically advanced, cost and energy efficient solutions which improve cooling efficiencies specific to your data center requirements.
Simple solutions supplied with pre-configured from the factory with built in intelligence and an energy efficient air-cooling system for effortless installation and customer convenience.
Get in touch with us at USystems Ltd to join the journey towards more efficient and sustainable data centers. Our leading and innovative technologies are designed to help you use less energy and reduce your carbon footprint on a global scale. Contact us now to explore how we can work together for a greener future.